PITCH FACETING MATS

WARNING: YOU ARE EXPECTED TO REVIEW THE SAFETY INFORMATION AT THE END OF THIS CATALOG IN ORDER TO PROTECT YOURSELF AND THOSE WHO COME IN CONTACT WITH MATERIALS LISTED IN THIS CATALOG. THEIR USE COULD BE HAZARDOUS TO YOUR HEALTH. IF YOU HAVE ANY QUESTIONS AS TO THE EFFECT ON YOUR HEALTH, OR YOU DO NOT UNDERSTAND THE INFORMATION FURNISHED, YOU SHOULD POSTPONE ANY PURCHASES UNTIL YOU CONSULT YOUR DOCTOR.- STORE MATERIALS OUT OF REACH OF CHILDREN***PARENTAL GUIDANCE IS REQUIRED IN THE USE OF THESE MATERIALS.

(Use to imprint polishing facets on a pitch lap)

TOOL DIAMETER

DESCRIPTION

PRODUCT CODE

     

4.25"

FACETED ROUND GRID PAD

PITMAT4.25

6.00"

FACETED ROUND GRID PAD

PITMAT6.00

8.00"

FACETED ROUND GRID PAD

PITMAT8.00

10.00"

FACETED ROUND GRID PAD

PITMAT10.00

12.50"

FACETED ROUND GRID PAD

PITMAT12.50

Procedure: First, the mat is laid on top of the ground mirror blank’s surface. Next, the hot pitch is poured onto the tool. Before the pitch has time to cool, it is pressed against the mirror's ground surface with the mat on it. After the pitch has cooled while against the mirror/mat surface, the mat is pulled/separated from the pitch. The fabricator should have a faceted pitch surface.